Things to Know about Kitchen Plumbing
One of the most sought after service of all time would be the plumbing service. From the case of laying out the piping, to the installation of hot water systems in a building, plumbers can choose to specialize on various fields. Clean water supply systems, gas systems, kitchen plumbing systems and drainage systems are some of the tasks which are carried out by plumbers. There in fact are different aspects in kitchen plumbing systems which have to be there for the kitchen to function efficiently.
Our kitchen is actually being fitted with pipes that will supply clean water and there are also other pipes that gets rid of the waste water. There also are other pipes of which supplies gas to the kitchen and gas valves are mostly being installed on the floor or on the wall. The cold and hot water valves are placed most often under sinks. From the valves that provides supply, the supply tubes will then be connected to the faucet.
The saddle valves could be attached to cold water valves for it to provide added water connections that will supply water to your water filter. The added connections could be made from plastic tubes or copper. Gas valves are usually found under appliances that uses gas and you could then shut it off if the gas is not used for safety purposes.
Pipes that are placed under the kitchen sink are usually curved and are also known as P-traps. The compression fittings will connect the curved pipes to the drainage pipe of the sink and then you could sometimes unscrew the fittings without the use of any tool. In case you are planning to replace kitchen sink pipes, the plumber should carefully take the measurements of the pipes so that new pipes can be cut just right.
Water valves likewise are turned off to cut off the supply of water if repair work is still ongoing. P-trap connections likewise are unscrewed from the tailpieces of the sink through the use of hand or through using pliers. The traps also are removed from the connections and the drain tailpieces also are going to be removed. New tailpieces will be screwed in and then new pipes also are cut and is fixed into place with compression fittings.
For you to keep your kitchen plumbing working efficiently, there actually are some things which you could do. One of such things would be where you have to make certain that you don’t pour grease or perhaps fatty substances down into your kitchen sink. Also try to avoid throwing leftover foods which are hard to grind and instead throw it in the garbage disposal.